A Short Guide To Choosing The Correct Ironing Board
An ironing board is, without doubt, a mundane item of household equipment to which the majority of people give very little thought. However, it is an essential item for any household and, if you choose the wrong one, then you might end up with badly pressed garments, take more time than you need to when ironing and even put unnecessary strain on your back.
Most people today use steam irons – or even steam generator irons, which are becoming ever more popular. In this case you definitely want to get an ironing board which has a mesh construction. This allows the steam to pass through the fabric of the garment being ironed, through the cover of the ironing board and through the top of the board itself. It helps to prevent the ironing board cover becoming soggy due to condensation after a few garments have been ironed.
The ironing board cover should be as smooth as possible to make ironing easier. It should be well secured and have no tendency to slip. An elasticated cover which incorporates one or two cross ties will usually suffice and will not slide around on you when you’re doing your ironing. A nice shiny metalised cover will also reflect heat from the iron back into the garment and will help to remove creases from the underside of the material whilst the top surface is being pressed.
The shape and size of the board will depend upon what you generally iron. A smaller board may be easier to manipulate and store – but it will generally require more repositioning of the item being ironed. A good taper on the pointed end will be useful for getting into corners – the shoulders of shirts and blouses for example – and will also be good for collars.
Height adjustable scissor action legs are pretty standard these days. Make sure the range of height adjustment is suitable for you and set the board at a height which doesn’t cause you any pain or discomfort in your back, neck or shoulders. If you prefer to iron sitting down (many people do) then it’s a good idea to choose a board which has curved legs. That way your knees won’t bump against the legs when you’re seated. A broad T-piece type of foot, or splayed feet with a connecting bar, will provide a good solid platform for you to iron on.
The support for the iron itself should be sturdy enough to take the weight of the iron. Wire type extension platforms are usually okay for standard steam irons. The extra weight presented by a steam generator iron may mean that a longer board which just features a heat resistant plate on a slightly extended surface is better. Alternatively, the base unit of steam generator irons may be positioned on the floor – as long as the connecting hose between base unit and iron is long enough to permit this.
Discover how you can cut your ironing time in half by using a Tefal steam generator iron – it’s a lot faster and the finished result is better as well
